Most New Zealand insurers require a current marine survey at some point, and the rules differ between them. Here is what insurers actually look for, when a survey is required, and how to make sure your report is accepted first time.
There is no single national rule. Each insurer sets its own underwriting criteria, and they change. In practice, a survey is usually requested in these situations:
The practical advice: ask your broker what your insurer requires before you book anything. The wording matters, because a limited survey that satisfies one insurer may be rejected by another.
An insurance survey is not a sales document and it is not a cosmetic report. The insurer is underwriting risk, so the survey needs to answer a narrow set of questions:
Reports that get rejected are usually thin on evidence: no photographs of defects, no moisture readings, no statement of value, and no clear distinction between what was inspected and what was not.
There are two levels, and choosing the right one saves money without risking rejection:
| Limited insurance survey | Full condition survey | |
|---|---|---|
| Time on site | Around half a day | A full day or more |
| Typical cost | From NZ$900 | NZ$1,000 to NZ$1,800+ |
| Scope | Structure, hull, machinery, safety and compliance items | Everything in a limited survey plus detailed systems, rigging, moisture mapping, sea trial and costed recommendations |
| Best for | Insurer renewal where the vessel is known and in good order | Purchase, first insurance, older vessels, or where condition is unknown |
If your insurer accepts a limited survey and the vessel is well known to you, take it. If the vessel is new to you, or the insurer wants a full condition report, do the full survey once rather than paying for two.
This is where owners lose money quietly. Market value is what the vessel would sell for today. Agreed value is the figure written into the policy, and it should be supported by evidence.
Under-insuring means a partial loss settlement will not cover the repair. Over-insuring means you pay a higher premium for a figure the insurer may challenge at claim time. A valuation survey gives you a defensible number with comparable sales and a condition assessment behind it.
If your vessel has had significant refit work, new machinery or electronics, that needs to be documented. Insurers do not pay for improvements they were never told about.
Most New Zealand insurers work on a cycle of roughly three to five years for a condition survey, with annual declarations in between. Some require more frequent surveys for older vessels, timber construction, or vessels used commercially.
Beyond the policy requirement, there are triggers that justify a survey regardless of the calendar: a major refit, a grounding, a fire or flooding event, a change of mooring to a more exposed location, or a plan to cruise offshore.
A defect does not automatically mean no cover. Insurers commonly respond in one of three ways: cover with a condition that the item is rectified within a stated period, cover excluding that specific item, or a requirement for a re-inspection once work is done.
What matters is that the report is honest and specific. A surveyor who softens findings to protect a sale is doing the owner no favours, because the insurer's assessor will find the same defects at claim time, and that is when cover gets disputed.
Tell us the insurer, the vessel and the deadline. We scope the survey to their requirement so it is accepted first time.
Every survey is carried out by a Class 1 Commercial Marine Engineer:
Wedding & Paine Marine survey vessels across all of New Zealand: