A pre-purchase survey is the single most important thing you will buy when you buy a boat. Wedding & Paine Marine are Class 1 Commercial Marine Engineers who survey private yachts, launches and commercial vessels to a commercial standard — with a written, photographic report delivered within 48 hours.
A pre-purchase survey is a condition assessment carried out for the buyer, before money changes hands. It is not a warranty, and it is not a cosmetic walk-around. It is a structured inspection of every accessible part of the vessel, recorded in writing, with photographs, so that you can make a decision based on evidence rather than optimism.
Structure and hull. We examine the hull above and below the waterline, the deck and superstructure, structural bulkheads and tabbing, engine beds and mounts, the keel and keel bolts, rudder and rudder stock, through-hulls and seacocks, chainplates, and the hull-to-deck joint. On GRP vessels we take moisture meter readings across the hull and decks; on timber we sound and probe; on steel and aluminium we assess coating condition, wastage and pitting.
Machinery and drivetrain. Engines are inspected cold, then started and run to operating temperature. We assess service history against hours, look for smoke, oil condition, coolant condition, exhaust and cooling system condition, engine mounts, alignment, shafts, stern glands, cutless bearings, propellers and rudders. Sail drives and outboards are assessed on the same basis.
Systems. Electrical systems including batteries, charging, distribution and wiring standards; fresh and salt water plumbing; bilge pumps; steering systems including hydraulics; LPG installations; heating and air conditioning; refrigeration; and navigation electronics.
Rigging and sails on sailing vessels: standing rigging including age, terminals and corrosion at the swages, chainplates, turnbuckles, mast and boom condition, running rigging, furling gear and winches.
Safety equipment and documentation. Liferafts, EPIRBs, flares, firefighting equipment, lifejackets and bilge systems, together with HIN, builder's plates, certificates and service records.
We attend the vessel, ideally with the owner, broker or a representative present so that questions can be answered on the spot and access can be arranged as we go. Expect three to six hours for a typical vessel, and a full day for larger or more complex boats. We work from the keel up and from the bow aft, in a set order, so that nothing is skipped and everything is photographed in sequence.
Where a sea trial is part of the scope, we run the vessel under load, check engine temperatures and pressures at cruise and at full throttle, observe shaft and steering behaviour, and note vibration, noise and exhaust condition that cannot be assessed alongside.
A haul-out is strongly recommended for any pre-purchase survey. In-water inspections cover a great deal, but the underwater sections, running gear, anodes, seacocks and the true condition of the antifouling and hull coating can only be properly assessed with the vessel out of the water. We are happy to work with your marina or boatyard to coordinate the haul-out.
Buyers often assume a survey will confirm what the listing says. In practice, the value of a survey is in the things nobody mentioned. Common findings on New Zealand vessels include: elevated moisture readings and osmotic blistering in older GRP hulls; wet or delaminated balsa cores in decks and cabin tops; corroded keel bolts and wasted keel plates; perished or seized seacocks; exhaust elbows and risers corroded from the inside out; engines with low hours but no service history, or high hours presented as low; standing rigging well past its service life with corrosion hidden inside the swages; DIY electrical work that does not meet standards; and safety equipment that is out of date or missing.
We report what we find, in plain language, with photographs, and we tell you what it means commercially: what needs fixing now, what needs watching, and what affects the vessel's value.
Every survey produces a detailed written report delivered within 48 hours of the inspection. The report is organised by section, illustrated with high-resolution photographs, and grades each item as Good, Serviceable, Requires Attention or Not Applicable. Deficiencies are prioritised as Urgent, Recommended or Advisory, so you can see immediately what must be dealt with before the vessel is used, what should be planned for, and what is simply worth knowing.
Reports are written to a standard accepted by New Zealand insurers, and can be used for finance, legal and estate purposes. If you are buying from overseas, we can attend, report and speak with you directly so that time zones do not slow the decision down.
Marine survey costs depend on vessel size, type and scope. As a guide: vessels under 7 metres from $400 to $600; 7 to 12 metres from $650 to $950; 12 to 18 metres from $1,000 to $1,600; and larger or more complex vessels from $1,800. A full survey day is $1,200 plus GST. Travel is quoted separately for anything outside the Auckland region.
Haul-out and hardstand charges are set by the marina or boatyard and sit outside our fee. We can recommend yards in each region and coordinate the booking. Reports are delivered within 48 hours, and we are happy to discuss findings by phone once you have read the report.
Clear access makes a measurable difference to what can be inspected. Before the survey, remove gear from lockers and bilges, clear the engine room of stored items, make sure keys and access codes are available, and have the service records, manuals and any recent invoices on board. If the vessel is ashore, arrange for the ladder, stands and power to be available. If she is afloat, arrange the berth and gate access in advance.
If you are working through a broker, we deal with the broker directly and keep you copied. If you are buying privately, we will coordinate with the vendor ourselves.
We respond same day and can usually attend within five to ten business days, sooner where timing is tight.
Straight answers from our Class 1 engineers:
Every survey is carried out by a Class 1 Commercial Marine Engineer:
Wedding & Paine Marine survey vessels across all of New Zealand:
Also surveying in
Auckland · Whangarei · Tauranga · Christchurch · Nelson · Queenstown