A condition survey gives you an accurate, independent picture of a vessel as she is today: what is sound, what is wearing, what needs attention and what it will cost. Written by Class 1 Commercial Marine Engineers, with photographs and prioritised recommendations, delivered within 48 hours.
A condition survey is a structured assessment of a vessel's current state. It is broader than an insurance inspection and more general than a pre-purchase survey: it does not assume a transaction, and it does not assume an insurer's risk appetite. It simply records what the vessel is like, area by area, in enough detail that a sensible decision can be made.
Owners use condition surveys to establish a baseline before a refit, to document a vessel's state before or after charter or loan, to support an insurance or finance application, to resolve a dispute about workmanship, or simply to know what they are dealing with before committing to a maintenance programme.
Buying or selling privately. Where a full pre-purchase survey is not warranted, a condition survey gives both parties an independent record.
Before a refit or major maintenance. A documented starting point protects you against scope creep and gives the yard a clear brief.
Annual or seasonal inspection. A yearly condition check catches the small things before they become expensive: perished hoses, corroded terminals, tired seacocks, failing pumps.
Insurance or finance applications where a full survey has not been requested but evidence of condition is needed.
Disputes and legal matters, where an independent, dated, photographic record of condition is required.
Charter, shared ownership and vessel management, where condition needs to be recorded at the start and end of an arrangement.
Hull, deck and superstructure, including moisture readings on GRP and sounding on timber; structural elements including bulkheads, tabbing, engine beds and chainplates; keel, keel bolts, rudder and steering gear; through-hulls, seacocks and skin fittings; antifouling and underwater coatings where the vessel is ashore; engines, gearboxes, shafts, stern gear and propellers; fuel, water, LPG and exhaust systems; electrical systems including batteries, charging, distribution and wiring; bilge pumps and flooding protection; navigation and communication equipment; rigging, spars, sails and deck hardware on sailing vessels; and all safety equipment.
Every item is graded Good, Serviceable, Requires Attention or Not Applicable, and every deficiency is prioritised as Urgent, Recommended or Advisory.
The report is written in plain language and organised by section, with high-resolution photographs of each area and each defect. It states what was inspected, what was not accessible and why, and what it means in practice. Where a defect has a cost implication, we say so, and where a defect needs a specialist (rigging, engines, electronics), we say that too rather than guessing.
Reports are delivered within 48 hours of the inspection. They are accepted by insurers, lenders and legal advisers, and they are written to be read by someone who was not there.
Costs depend on vessel size and the depth of inspection required. As a guide: vessels under 7 metres from $400 to $600; 7 to 12 metres from $650 to $950; 12 to 18 metres from $1,000 to $1,600; larger or more complex vessels from $1,800. A full survey day is $1,200 plus GST. Travel is quoted separately outside the Auckland region.
If you only need a specific area assessed, such as a moisture survey, a machinery inspection or a rigging check, we can scope the work to that and price it accordingly.
Tell us the vessel and what you need to know, and we will scope it and give you a firm price. Same-day response.
Straight answers from our Class 1 engineers:
Every survey is carried out by a Class 1 Commercial Marine Engineer:
Wedding & Paine Marine survey vessels across all of New Zealand:
Also surveying in
Auckland · Whangarei · Tauranga · Christchurch · Nelson · Queenstown