Moisture is the most misunderstood number in boat surveying. A meter reading on its own tells you very little; where the reading was taken, what it was compared against, and what the hull is made of tells you everything. We test properly and explain the results in plain language.
Water enters a GRP laminate through the gelcoat, through fittings and fastenings, through cracks and impact damage, and through the hull below the waterline over decades of immersion. In a solid laminate it lowers strength and can lead to blistering and, eventually, delamination. In a cored laminate, water in the core is far more serious: balsa and foam cores rot, delaminate and lose structural value, and the repair is invasive and expensive.
Timber vessels have their own moisture dynamics, and plywood and timber cores behave differently again. The material and construction determine what a reading means.
We use calibrated capacitance or resistance meters, taking a grid of readings across the hull, decks, cabin tops and superstructure rather than a handful of spot checks. Readings are taken at consistent heights and spacings, and compared against reference points: above the waterline where the laminate is dry, known dry areas of the same vessel, and the vessel's own baseline where a previous survey exists.
Meter readings are only part of the picture. We combine them with percussion testing (tapping) to detect delamination and voids, visual inspection for blistering, cracking, weeping fittings and staining, and inspection of the hull below the waterline where the vessel is ashore. On cored structures we sound and, where necessary, take core samples.
Temperature, humidity, hull temperature and recent haul-out all affect readings, and we record the conditions so the numbers can be interpreted correctly and compared with future surveys.
We report readings against a consistent scale: 0 to 10 percent is acceptable, indicating a dry laminate. 11 to 20 percent is a monitoring band, where moisture is present but not yet at a level that demands action. 21 percent and above is elevated and requires further investigation, because at that level blistering, delamination and core damage become real risks.
A single high reading is not a diagnosis. A cluster of high readings in one area usually indicates a local source: a leaking fitting, a damaged area, a poorly sealed chainplate or a repair that let water in. Widespread elevated readings across the underwater hull indicate long-term ingress through the gelcoat, which is the classic precursor to osmosis.
Osmotic blistering is a chemical process: water diffuses into the laminate, dissolves water-soluble materials in the resin, and creates cells of concentrated solution that draw in more water by osmosis. The result is blisters under the gelcoat, which can pop, weep and spread. It is a slow process and not usually an immediate safety issue, but it is a value issue, and it gets more expensive the longer it is left.
Treatment ranges from drying and barrier coating for early-stage moisture, through blister removal and epoxy treatment, to full laminate repair where delamination has occurred. We assess the stage, describe the likely treatment path, and give indicative costs so the decision is informed.
Before buying any GRP vessel more than about ten years old; before a major refit or repaint, so you are not painting over a problem; at insurance renewal where moisture is a concern; after a grounding, impact or repair; and periodically as part of an owner's maintenance record, so you have a baseline to compare against.
A standalone moisture survey is typically $450 to $750 plus GST depending on vessel size and the area covered, and it is included as standard in our pre-purchase and condition surveys. Travel is quoted separately outside the Auckland region. Where the vessel needs to be ashore for a proper underwater assessment, the yard charges sit outside our fee.
Send us the vessel details and any previous readings, and we will scope the test and tell you what it will cost.
Straight answers from our Class 1 engineers:
Every survey is carried out by a Class 1 Commercial Marine Engineer:
Wedding & Paine Marine survey vessels across all of New Zealand:
Also surveying in
Auckland · Whangarei · Tauranga · Christchurch · Nelson · Queenstown